# Bypass Validation glitch

**URL:** <https://support.prodi.gy/t/bypass-validation-glitch/3451>\
**Category:** Uncategorized\
**Tags:** to-be-released, server\
**Created:** [September 28, 2020, 6:17pm UTC](https://support.prodi.gy/t/bypass-validation-glitch/3451 "2020-09-28T18:17:21Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![zhiyan114](https://sea2.discourse-cdn.com/flex020/user_avatar/support.prodi.gy/zhiyan114/32/1592_2.png) [@zhiyan114](https://support.prodi.gy/u/zhiyan114)\
**Post date:** [September 28, 2020, 6:17pm UTC](https://support.prodi.gy/t/bypass-validation-glitch/3451/1 "2020-09-28T18:17:21Z")

</div>

Recently, I discovered a bug that will basically bypass the server validation.  
When you press the A key or pressing the Accept button repeatedly at a fast pace (not sure about reject but probably the same) while the server is validating the current image (and has pass the validation), the image ahead of the current image will be accepted even if it didn't pass the validation requirement (the amount of image being accepted ahead is depend on how many time the button are clicked.).

---

<div class="post-metadata">

**Author:** ![ines](https://sea2.discourse-cdn.com/flex020/user_avatar/support.prodi.gy/ines/32/3_2.png) [@ines](https://support.prodi.gy/u/ines)\
**Post date:** [September 28, 2020, 6:54pm UTC](https://support.prodi.gy/t/bypass-validation-glitch/3451/2 "2020-09-28T18:54:41Z")

</div>

Thanks for the report!

Especially with large files like images that are sent back and forth, it's pretty difficult to prevent slightly unideal behaviours if you just hold down the A key. I haven't tested this in detail yet but it looks like this problem should be easy to solve by additional checks against the task hash and blocking. (Of course, the experience won't be very nice because you'll get stuck with the alert, but... that's also kinda the point.)

---

<div class="post-metadata">

**Author:** ![zhiyan114](https://sea2.discourse-cdn.com/flex020/user_avatar/support.prodi.gy/zhiyan114/32/1592_2.png) [@zhiyan114](https://support.prodi.gy/u/zhiyan114)\
**Post date:** [September 28, 2020, 7:26pm UTC](https://support.prodi.gy/t/bypass-validation-glitch/3451/3 "2020-09-28T19:26:17Z")

</div>

True, but I rather have a bunch of alerts (which can be quickly closed out by holding enter) than image bypassing the validation requirement which may alter the model's result during training.